Clothing/ready-made garments

From Cargo Handbook - the world's largest cargo transport guidelines website
Revision as of 12:09, 15 June 2012 by DeBeer (talk | contribs)
Infobox on Clothing/ready-made garments
Example of Clothing/ready-made garments
Clothingreadymadegarments.jpg
Facts
Origin Ready-made garments are today transported worldwide from and to all continents.
Stowage factor (in m3/t)
  • 2.30 - 9.47 m³/t (cartons)
  • 1.08 - 6.06 m³/t (boxes)
Humidity / moisture
  • Relative humidity: 45 - 70%
  • Water content: 8 - 12% (woolen fabric)
    7.85 - 8.50% (cotton fabric)
  • Maximum equilibrium moisture content: 70%
Ventilation Recommended ventilation conditions: air exchange rate: 6 changes/hour (airing), if the dew point of the external air is lower than the dew point of the hold air.
Risk factors The goods are liable to catch fire due to the structure of the processed natural and manmade fibers and the surface treatment or finishing which they have undergone. Smoking must therefore be strictly prohibited during loading/unloading of the holds/containers. CO2 should preferably be used to extinguish fires.

Clothing/ready-made garments


Description

Ready-made garments comprise outer- and underclothing, made from different fabrics and yarns. Outer clothing is often transported as 'hanging garments', inserted into tight-fitting individual dust covers which are sealed at the bottom. Other clothing are generally transported in cartons.

Shipment / storage

As they provide adequate protection against creasing, dust and dirt, garment containers are best suited to transporting items of clothing. Garment containers are equipped with bars for hanging up items of clothing on coat-hangers. The bars are generally secured in perforated rails in the walls. The coat-hangers are provided with special clips. A curtain is located between the door and the inside; the wooden floor is impregnated and lined with floor covering.

Providing that limits for water content of goods, packing and flooring are complied with, 'standard containers' are (also) considered suitable for transport of ready-made-garments.

As garments are strongly hygroscopic and readily absorb moisture, they are to be protected from (extraneous) moisture. The stowage space must be dry, leakproof, clean, carried away from heat sources and free of obnoxious smells.

Excessive and pro-longed exposure to light can degrade natural and manmade fibers.

Ready-made garments resp. clothing are best stored at 20°C ± 5°C. Temperature variations within the range of 10 - 30°C do not adversely affect quality.

Subjecting the goods to much higher temperatures can degrade the physical characteristics (i.e. strength, elongation, shrinkage, crease tendency, electrical conductivity and brittleness) of the fibers, such apart from the risk of pests and microorganisms.
Very low temperatures can cause loss of strength.

Ready-made garments made from natural fibers are hygroscopic (hygroscopicity), while those made from synthetic fibers are only slightly so.

A relative humidity of 45 - 70% is deemed optimal. Specified humidity levels can be maintained in airtight packaging by using desiccants. Excessively high humidity levels and seawater, rain and condensation water may cause mustiness, mildew stains and mold growth and increase levels of insect infestation. Rust stains may arise as a result of the corrosion of metal strapping. Natural fibers converted into woven fabrics have a high swelling index, caused by their histological microstructure. Thus, for instance, modified cotton may absorb up to 25% of its own weight of water without feeling damp. This has a significant effect on the physical characteristics of the fibers, such as strength, elongation, creasing tendency and electrical conductivity. If contact with chloride solutions, e.g. seawater, is suspected, a seawater test using the silver nitrate method must be performed.

Ventilation
Ready-made garments require particular temperature, humidity/moisture and possibly ventilation conditions. Recommended ventilation conditions: air exchange rate: 6 changes/hour (airing), if the dew point of the external air is lower than the dew point of the hold air.

Biotic activity
This risk factor has no significant influence on the transport of this product.

Gases
This risk factor has no significant influence on the transport of this product.

Risk factors

Self-heating/Spontaneous combustion
The goods are liable to catch fire due to the structure of the processed natural and manmade fibers and the surface treatment or finishing which they have undergone. Smoking must therefore be strictly prohibited during loading/unloading of the holds/containers. CO2 should preferably be used to extinguish fires.

Odor
Active behavior: Ready-made garments may release a slightly unpleasant odor. Since they are generally treated with impregnating and finishing agents, they should as a precaution not be stowed together with odor-sensitive goods. Odor tainting may also be caused by insecticides (risk of moth infestation). In the case of workwear, an unpleasant odor may be caused by certain finishing substances used to improve wearability or to provide resistance to rotting, mold and pests.
Passive behavior: Ready-made garments are highly sensitive to foreign odors. The modified fabric surface and high pore volume allow unpleasant odors to be very readily absorbed, which may indirectly result in depreciation.

Contamination
Active behavior: Ready-made garments are a very clean cargo.
Passive behavior: Dust, colorants, ores, dirt, rust or leakages of accompanying cargo (acids, molasses, glue, fats/oils, lubricants etc.) may contaminate the cartons or the goods themselves and lead to a reduction in utility value. Garment containers and special truck bodies must be leakproof and possibly lined with carpet, to stop dust, dirt and other foreign bodies from penetrating or being swirled up, as, despite the protective covers on the garments, even the smallest foreign bodies may trigger pilling of the surface of the fabric.

Mechanical influences
Garments are sensitive to mechanical stresses. Excessively thin plastic covers may tear if stowed too tightly and form chafing points, which cause undesirable pilling or snagging of the surface of the fabric. This impairs the appearance of the surface (depreciation). The coat-hangers must therefore be properly secured (clips) and the items of clothing adequately wrapped to protect them from rubbing together/chafing.

Toxicity/Hazards to health
This risk factor has no significant influence on the transport of this product.

Shrinkage / Shortage/Theft
Ready-made garments are very valuable and are therefore at acute risk of theft. Containers should be stowed such that the doors of adjacent containers face towards each other. The use of special seals is recommended.

Insect infestation / Diseases
The goods themselves are seldom subject to insect infestation. However, when damp they very rapidly succumb to attack by mold and rot-causing bacteria, especially in conjunction with any finishes which may have been applied. Mildew stains of a gray-green or brown-black color develop and produce a musty odor. The risk of insect infestation is lower for clothing made from polyester fibers than for clothing made from natural fibers.

The holds/containers must be pest-free, since many insects which are normally typical pests of foodstuffs and animal feed may also damage textiles, especially if they seek out these materials for metamorphosis. In their search for breeding grounds or pupation sites, they penetrate boxes and cartons and even bite through metal foils and plastic films and may thereby cause considerable destruction. For instance, a consignment of pullovers from East Asia displayed eating damage caused by red-legged ham beetles (Necrobia rufipes), which had hatched out of a consignment of copra transported in the same hold and multiplied considerably in number. In their search for new breeding grounds, the beetles had got into wooden boxes and thence through metal foils, cartons and finally through plastic bags into the woolen goods. As this environment did not appeal to them, they tried to chew their way back out and, in so doing, caused considerable destruction to the pullovers. Larvae from the yellow mealworm (Tenebrio molitor) also migrated during transport from an accompanying cargo of flour and rolled oats into a consignment of pullovers, for pupation. Therefore, do not stow in a hold/container together with foodstuffs and animal feed or hides/furs.

Note:(Source including Transport Information Service of the GDV)