Difference between revisions of "Benzene"
m (→Risk factors) |
(→Risk factors) |
||
Line 30: | Line 30: | ||
According to the Agency for Toxic Substances and Disease Registry (ATSDR) (2007), benzene is both an anthropogenically produced and naturally occurring chemical from processes that include: volcanic eruptions, wild fires, synthesis of chemicals such as phenol, production of synthetic fibers, and fabrication of rubbers, lubricants, pesticides, medications, and dyes. The major sources of benzene exposure are [[tobacco]] smoke, automobile service stations, exhaust from [[motor vehicles]], and industrial emissions; however, ingestion and dermal absorption of benzene can also occur through contact with contaminated water. Benzene is hepatically metabolized and excreted in the urine. Measurement of air and water levels of benzene is accomplished through collection via [[Activated Charcoal]] tubes, which are then analyzed with a gas chromatograph. The measurement of benzene in humans can be accomplished via urine, blood, and breath tests; however, all of these have their limitations because benzene is rapidly metabolized in the human body into by-products called metabolites.<br><br> | According to the Agency for Toxic Substances and Disease Registry (ATSDR) (2007), benzene is both an anthropogenically produced and naturally occurring chemical from processes that include: volcanic eruptions, wild fires, synthesis of chemicals such as phenol, production of synthetic fibers, and fabrication of rubbers, lubricants, pesticides, medications, and dyes. The major sources of benzene exposure are [[tobacco]] smoke, automobile service stations, exhaust from [[motor vehicles]], and industrial emissions; however, ingestion and dermal absorption of benzene can also occur through contact with contaminated water. Benzene is hepatically metabolized and excreted in the urine. Measurement of air and water levels of benzene is accomplished through collection via [[Activated Charcoal]] tubes, which are then analyzed with a gas chromatograph. The measurement of benzene in humans can be accomplished via urine, blood, and breath tests; however, all of these have their limitations because benzene is rapidly metabolized in the human body into by-products called metabolites.<br><br> | ||
OSHA regulates levels of benzene in the workplace. The maximum allowable amount of benzene in workroom air during an 8-hour workday, 40-hour workweek is 1 ppm. Because benzene can cause cancer, NIOSH recommends that all workers wear special breathing equipment when they are likely to be exposed to benzene at levels exceeding the recommended (8-hour) exposure limit of 0.1 ppm<br><br> | OSHA regulates levels of benzene in the workplace. The maximum allowable amount of benzene in workroom air during an 8-hour workday, 40-hour workweek is 1 ppm. Because benzene can cause cancer, NIOSH recommends that all workers wear special breathing equipment when they are likely to be exposed to benzene at levels exceeding the recommended (8-hour) exposure limit of 0.1 ppm<br><br> | ||
+ | |||
+ | The carriage of benzene, a highly flammable and toxic chemical, poses significant risks that require careful management. Here are the key risks associated with the transport of benzene: | ||
+ | |||
+ | 1. Fire and Explosion Hazard | ||
+ | - Flammability: Benzene is highly flammable and can form explosive mixtures with air. The vapors can ignite easily, and a small spark can cause a fire or explosion. | ||
+ | - Mitigation: Use flame-proof equipment, avoid open flames and sparks, ensure proper ventilation, and implement strict no-smoking policies. Equip the transport vessel with fire suppression systems. | ||
+ | |||
+ | 2. Health and Safety Hazards | ||
+ | - Toxicity: Benzene is highly toxic and can cause severe health issues, including dizziness, headaches, drowsiness, and long-term effects like leukemia and other blood disorders upon inhalation or skin absorption. | ||
+ | - Mitigation: Use appropriate personal protective equipment (PPE) such as gloves, goggles, and respirators. Implement strict safety protocols for handling and emergency procedures. | ||
+ | |||
+ | 3. Environmental Risks | ||
+ | - Spillage and Contamination: Benzene spills can lead to significant environmental damage, contaminating soil and water bodies, harming wildlife, and posing risks to human health. | ||
+ | - Mitigation: Use double-walled containers and spill containment systems. Have a comprehensive spill response plan, including materials for spill containment and cleanup. | ||
+ | |||
+ | 4. Chemical Reactivity | ||
+ | - Reactivity: Benzene can react with strong oxidizers, acids, and other chemicals, potentially leading to dangerous reactions. | ||
+ | - Mitigation: Ensure that benzene is stored and transported away from incompatible substances. Use proper labeling and segregation techniques. | ||
+ | |||
+ | 5. Exposure Risks | ||
+ | - Vapor Inhalation: Benzene vapors can accumulate in confined spaces, posing a risk of inhalation. | ||
+ | - Mitigation: Ensure adequate ventilation, use vapor detection systems, and avoid transporting in confined spaces without proper safety measures. | ||
+ | |||
+ | 6. Regulatory Compliance | ||
+ | - Transport Regulations: Benzene is subject to stringent regulations due to its hazardous nature. Non-compliance can result in legal penalties and increased risk of accidents. | ||
+ | - Mitigation: Adhere to international and local regulations for the transport of hazardous materials. Ensure all necessary documentation, labeling, and safety measures are in place. | ||
+ | |||
+ | 7. Handling and Stability Issues | ||
+ | - Leakage and Container Integrity: Benzene containers must be robust and leak-proof to prevent accidental releases during transport. | ||
+ | - Mitigation: Regularly inspect containers for integrity, use high-quality materials for containment, and employ secondary containment systems. | ||
+ | |||
+ | 8. Human Error | ||
+ | - Operational Mistakes: Human error during loading, unloading, or transportation can lead to accidents. | ||
+ | - Mitigation: Provide thorough training for all personnel involved in the handling and transport of benzene. Implement strict operational procedures and safety checks. | ||
+ | |||
+ | 9. Security Risks | ||
+ | - Theft and Sabotage: Due to its hazardous nature, benzene could be a target for theft or sabotage. | ||
+ | - Mitigation: Implement security measures such as tracking systems, secure storage facilities, and background checks for personnel. | ||
+ | |||
+ | <b>Summary</b> | ||
+ | |||
+ | To safely transport benzene, it is essential to: <br> | ||
+ | |||
+ | - Implement stringent safety and emergency protocols. <br> | ||
+ | - Use appropriate containment and safety equipment. <br> | ||
+ | - Ensure regulatory compliance and proper training for personnel. <br> | ||
+ | - Conduct regular inspections and maintenance of transport equipment. <br> | ||
+ | - Develop and maintain comprehensive spill and emergency response plans. | ||
+ | <br><br> | ||
+ | |||
[[Category: Products]] | [[Category: Products]] | ||
[[Category: Oil and chemicals]] | [[Category: Oil and chemicals]] |
Latest revision as of 03:01, 29 May 2024
Infobox on Benzene | |
---|---|
Example of Benzene | ![]() |
Facts | |
Origin | - |
Stowage factor (in m3/t) | - |
Humidity / moisture | - |
Ventilation | - |
Risk factors | See text |
Benzene
Description / Application
Benzene (also called benzol – coal naphta - ) is the lightest fraction obtained from the distillation of Coal Tar hydrocarbons (produced by coking coal in the steel industries) and is synthesised from natural gas. Benzene occurs naturally in Crude Oil. It is a thin, colourless, highly flammable liquid with a characteristic smell. It is a good motor fuel solvent as well as being a feedstock for other benzene derivatives used in dye, insecticides and plastics production. At a later stage in the distillation process, a heavy Coal Tar solvent naphtha and a naphthalene fraction are produced. The fraction is further treated to yield naphthalene, a white crystalline solid with a penetrating tarry smell. Naphthalene is the most abundant of the aromatic hydrocarbons, being important as the starting point for a number of dyes and also as a source of phthalic acid which in turn leads to indigo and to certain resins used in very large quantities in paint. Naphthalene can be reduced to a series of compounds such as tetralin and decalin which have great value as solvents.
Benzene is by far the most important of the aromatics and its principal derivatives are cyclohexane, cumene, ethyl benzene and alkyl benzene. Cyclohexane accounts for approximately 23% of the benzene usage. Ethyl benzene represents approximately 45% of the benzene production and is used in the manufacture of styrene which in turn is used to produce polystyrene and ABS (acrylonitrile/buradiene/styrene) resins, both of which should enjoy strong growth rates. Cumene is used to make phenol and alkyl benzene goes toward the manufacture of detergents.
Benzene is used mainly as an intermediate to make other chemicals. About 80% of benzene is consumed in the production of three chemicals, ethylbenzene, cumene, and cyclohexane. Its most widely produced derivative is ethylbenzene, precursor to styrene, which is used to make polymers and plastics. Cumene is converted phenol for resins and adhesives. Cyclohexane is used in the manufacture of Nylon. Smaller amounts of benzene are used to make some types of rubbers, lubricants, dyes, detergents, drugs, explosives, and pesticides.
In both the US and Europe, 50% of benzene is used in the production of ethylbenzene/styrene, 20% is used in the production of cumene, and about 15% of benzene is used in the production of cyclohexane (eventually to nylon).
As a gasoline (petrol) additive, benzene increases the octane rating and reduces knocking. As a consequence, gasoline often contained several percent benzene before the 1950s, when tetraethyl lead replaced it as the most widely used antiknock additive. With the global phaseout of leaded gasoline, benzene has made a comeback as a gasoline additive in some nations. In the United States, concern over its negative health effects and the possibility of benzene's entering the groundwater have led to stringent regulation of gasoline's benzene content, with limits typically around 1%. European petrol specifications now contain the same 1% limit on benzene content. The United States Environmental Protection Agency introduced new regulations in 2011 that lowered the benzene content in gasoline to 0.62%.
In laboratory research, toluene is now often used as a substitute for benzene. The solvent-properties of the two are similar, but toluene is less toxic and has a wider liquid range.
Shipment / Storage
Benzene is a colourless to light-yellow, mobile, non-polar liquid of highly refractive nature; aromatic odour; vapours burn with smoky flame.
- Boiling point; 80°C
- Flashpoint; -11°C
- Autoignition temp.; 562°C
Miscible with alcohol, ether, acetone, carbon tetrachloride, carbon disulfide, Acetic Acid; slightly soluble in water.
For overseas carriage aspects of Chemicals, the readers are recommended to acquire or have access to a good chemical dictionary, and a copy of the International Maritime Dangerous Goods (IMDG) Code, issued by the International Maritime Organisation. Also consult the applicable MSDS sheet.
See also: http://www.chemicalland21.com/petrochemical/BENZENE.htm#
Risk factors
Carcinogen. Highly toxic. Flammable; dangerous fire risk. Explosive limits in air 1,5% to 8% by volume. TLV: 10 ppm in air.
According to the Agency for Toxic Substances and Disease Registry (ATSDR) (2007), benzene is both an anthropogenically produced and naturally occurring chemical from processes that include: volcanic eruptions, wild fires, synthesis of chemicals such as phenol, production of synthetic fibers, and fabrication of rubbers, lubricants, pesticides, medications, and dyes. The major sources of benzene exposure are tobacco smoke, automobile service stations, exhaust from motor vehicles, and industrial emissions; however, ingestion and dermal absorption of benzene can also occur through contact with contaminated water. Benzene is hepatically metabolized and excreted in the urine. Measurement of air and water levels of benzene is accomplished through collection via Activated Charcoal tubes, which are then analyzed with a gas chromatograph. The measurement of benzene in humans can be accomplished via urine, blood, and breath tests; however, all of these have their limitations because benzene is rapidly metabolized in the human body into by-products called metabolites.
OSHA regulates levels of benzene in the workplace. The maximum allowable amount of benzene in workroom air during an 8-hour workday, 40-hour workweek is 1 ppm. Because benzene can cause cancer, NIOSH recommends that all workers wear special breathing equipment when they are likely to be exposed to benzene at levels exceeding the recommended (8-hour) exposure limit of 0.1 ppm
The carriage of benzene, a highly flammable and toxic chemical, poses significant risks that require careful management. Here are the key risks associated with the transport of benzene:
1. Fire and Explosion Hazard
- Flammability: Benzene is highly flammable and can form explosive mixtures with air. The vapors can ignite easily, and a small spark can cause a fire or explosion. - Mitigation: Use flame-proof equipment, avoid open flames and sparks, ensure proper ventilation, and implement strict no-smoking policies. Equip the transport vessel with fire suppression systems.
2. Health and Safety Hazards
- Toxicity: Benzene is highly toxic and can cause severe health issues, including dizziness, headaches, drowsiness, and long-term effects like leukemia and other blood disorders upon inhalation or skin absorption. - Mitigation: Use appropriate personal protective equipment (PPE) such as gloves, goggles, and respirators. Implement strict safety protocols for handling and emergency procedures.
3. Environmental Risks
- Spillage and Contamination: Benzene spills can lead to significant environmental damage, contaminating soil and water bodies, harming wildlife, and posing risks to human health. - Mitigation: Use double-walled containers and spill containment systems. Have a comprehensive spill response plan, including materials for spill containment and cleanup.
4. Chemical Reactivity
- Reactivity: Benzene can react with strong oxidizers, acids, and other chemicals, potentially leading to dangerous reactions. - Mitigation: Ensure that benzene is stored and transported away from incompatible substances. Use proper labeling and segregation techniques.
5. Exposure Risks
- Vapor Inhalation: Benzene vapors can accumulate in confined spaces, posing a risk of inhalation. - Mitigation: Ensure adequate ventilation, use vapor detection systems, and avoid transporting in confined spaces without proper safety measures.
6. Regulatory Compliance
- Transport Regulations: Benzene is subject to stringent regulations due to its hazardous nature. Non-compliance can result in legal penalties and increased risk of accidents. - Mitigation: Adhere to international and local regulations for the transport of hazardous materials. Ensure all necessary documentation, labeling, and safety measures are in place.
7. Handling and Stability Issues
- Leakage and Container Integrity: Benzene containers must be robust and leak-proof to prevent accidental releases during transport. - Mitigation: Regularly inspect containers for integrity, use high-quality materials for containment, and employ secondary containment systems.
8. Human Error
- Operational Mistakes: Human error during loading, unloading, or transportation can lead to accidents. - Mitigation: Provide thorough training for all personnel involved in the handling and transport of benzene. Implement strict operational procedures and safety checks.
9. Security Risks
- Theft and Sabotage: Due to its hazardous nature, benzene could be a target for theft or sabotage. - Mitigation: Implement security measures such as tracking systems, secure storage facilities, and background checks for personnel.
Summary
To safely transport benzene, it is essential to:
- Implement stringent safety and emergency protocols.
- Use appropriate containment and safety equipment.
- Ensure regulatory compliance and proper training for personnel.
- Conduct regular inspections and maintenance of transport equipment.
- Develop and maintain comprehensive spill and emergency response plans.